Automatic Screen Printer B102

Price from 2 903 000 ₽

* Images of goods in the photographs presented on the site may differ from the originals.

The automatic screen printing printer is designed for applying solder paste to printed circuit boards and was designed primarily for use in medium and large-scale electronics industries.

Screen printing equipment can be used both as a part of production lines in inline mode, and in small industries as a stand-alone device in offline mode.

Price from 2 930 000 rub.

ZENCHA-Pskov JSC is ready to consider the possibility of manufacturing any metal products, plastic products, products for electrical purposes according to the design documentation of the customer.

Technical parameters

The weight of the printer, kg

600

Power Supply, V / Hz / W

230 / 50-60 / 1,5

Pneumatics

Compressed air supply (pressure 5-6 Bar)

Ambient temperature, °C

+10... +40

Dimensions (LxWxH), mm

1750х1120х1600

Thickness of the printed circuit Board, mm

0.8 - 6

The dimensions of the printed circuit Board, max., mm

620 х 508

Fixing the printed circuit Board

Mechanical with programmable clamping force. Vacuum fixation (optional)

Support PCB Board

Magnetic rods and bars Automatic support system (optional)

The size of the frame with the stencil/screen, max., mm

740х740х40

The size of the frame with the stencil/screen, min., mm

540х540х30

Edge thickness, max., mm

Frame thickness, min., mm

The fixation system of the stencil

Pneumatic clamp on top

Pneumatic guide for stencil tension systems (optional)

For stencil tension systems with pneumatic tension, a quick-release fitting is provided

Number of cameras

2 high-resolution video cameras

2D inspection (option)

Programmable, high-speed

Alignment accuracy

±12.5 microns. at 6s

The accuracy of the application

±25 microns at 6s

Print area, max., mm

508х510

Print speed, mm / s

5 - 300

Creating programs

< 5 min, with the ability to save in the system memory

Printing mode

Semi-automatic, automatic

Idling time, s

Printhead

Consists of two independent parts, free suspension of squeegees. Ability to print on X / Y axes, diagonals and a combination of modes (optional)

Pressure of the squeegee

0 - 240 Н, контролируемое с точностью до 0.5 Н

Type of the blades

Any size (on request): 300, 350, 400mm

Automatic determination of the width of the squeegee (option)

After installing the squeegee, the system automatically measures the width

Option to save soldering paste

To prevent the soldering paste from drying out, when the printer is idle for a long time, you can set the mode of lowering both squeegees to the surface of the stencil. The paste roller is located between the squeegees and retains its working properties for a long time

The speed of separation of stencil and PCB

Adjustable – from 0 to 100 mm/sec

Reference marks

A minimum of 2 reference marks on the printed circuit Board is required

The size of the fiducial

0.1-3 mm, it is possible to use non-standard signs

Glue dispensing system (optional)

Screw, capacity-3100 points per hour

Stencil cleaning system

Vacuum (capacity up to 25 l / min), with the supply of cleaning liquid. With the possibility of vibration (option)

Control unit

Data entry